Chemical Engineering Thesis Topics

Dehydration of Ethanol Water Solution Using Activated Starch   Abstract of Dehydration of Ethanol Water Solution Using Activated Starch This project research work was based on dehydration of ethanol water solution using activated starch. The extracted starch obtained was of whistler method. The starch obtained from potato was weighed with the use of a weighing…

Process and Quality Factors in Laundary and Toilet Soap Production   Abstract of Process and Quality Factors in Laundary and Toilet Soap Production This projects is aimed at knowing the process and quality factor in Laundary and Toilet Soap Projection.  Various factors affected the quality of the soap produced.  These include the method used in…

Report on Fabrication of Flow Nozzle   Abstract of Report on Fabrication of Flow Nozzle The flow nozzle was constructed based on the dimensions and specifications of the international standard organization (I.S.O) recommendation. Throat diameter 42.5mm Length converging nozzle 68mm Thickness of nozzle 2mm Diameter of major axis of ellipse 85mm Diameter of minor axis…

Extraction of Wax From Cocoa Pod                            Chapter One of Extraction of Wax From Cocoa Pod INTRODUCTION The word wax describes a large variety of substances of plant and animal origin, as well as man made products which are mostly petroleum derivatives. However, natural waxes are not single substances, but a mixture of various of…

Construction of Kerosine Cooking Stove   Abstract of Construction of Kerosine Cooking Stove The purpose of the construction is aimed at producing heat energy for commercial use by turning liquid fuel(kerosene).the construction was successful by appropriate selection of engineering material favourably mild steel(blacksheet) and steel iron for special p2rts. The technological properties passed by the…

Construction of Soap Cutting Device   Abstract of Construction of Soap Cutting Device The aim of the project is to construct a soap cutting device capable of size-remaining the soap produced into regular bars and tablets without error in shapes and sizes. Soap cutting devices are used to size reduce or cut the bulk of…

Construction of Simple Distillation Unit   Abstract of Construction of Simple Distillation Unit Distillation unit is the judgment used for the separation of liquid mixture depending on the volatility of the component. It has the top section and bottom section. In the top section this is where more volatile component goes and the bottom section…

Construction of Propeller Agitator   Abstract of Construction of Propeller Agitator The construction of propeller agitator used for agitating and mixing of low viscous fluid was fabricated in the mechanical workshop of the institute of management and technology Enugu. In the construction, galvanized mild steel was chosen due to its inherent properties.  After procurement, the…

Construction of Simple Metallic Mould                            Chapter One of Construction of Simple Metallic Mould INTRODUCTION The equipment mostly used in the industries and manufacturing establishments requires the production of definite shape, pattern, different design, embossments and others, are usually moulds.  The ability of moulds to withstand pressure, distortion and corrosion determines the application. A mould…

The Construction of Sand Filter for Portable Water Filtration With Stainless Steel Material   Abstract of The Construction of Sand Filter for Portable Water Filtration With Stainless Steel Material The project constructed was sand filter; equipment for portable water filtration.  This was constructed using a mild steel material.  This was because of the excellent high…

Construction of Office Table and Chairs   Abstract of Construction of Office Table and Chairs Office table and chairs usually come in set of three, and are designed to fit one into another for convenient storage. Furniture of this soot should be of the highest quality, attractive in design and capable of standing up to…

Construction of Aluminium Wall Rack   Abstract of Construction of Aluminium Wall Rack This project was constructed with the desired materials of construction. The materials include aluminum, glass and wood.  Aluminum was used in forming the skeleton of the structure, glass was used for the doors while wood was used in the sides, top, base…

Construction of Air Conditioning Unit   Abstract of Construction of Air Conditioning Unit The project of construction is one (1) horse power Air conditioning unit which was executed successfully.  With up to seventy five percent (75%) efficient performance. The project started with the construction of the size of the air conditioning unit.  The air conditioning…

Construction of Heat Exchanger Fabrication of a Tube and Shell Heat Exchanger System   Abstract of Construction of Heat Exchanger Fabrication of a Tube and Shell Heat Exchanger System There are two methods of constructing heat exchangers: Plate type.  Parallel flow-the hot fluid and the coolant flow in the same direction. Counter flow:-           The hot…

Construction of a Distillation Column With Reflex Divider and Condenser   Abstract of Construction of a Distillation Column With Reflex Divider and Condenser In this project, distillation is made up of a column, condenser and reflux divider. An overview of the dimensions of some of the major parts is: Height of the column = 450mm…

Construction of a Model Shell and Tube Heat Exchanger   Abstract of Construction of a Model Shell and Tube Heat Exchanger The precise content of this project was to construct a model shell and tube heat  exchanger. The material for construction of this project (equipment) and their dimensions are as follows: 500mm length of a…

Construction of a Chemical Rack, Study Apparatus   Abstract of Construction of a Chemical Rack, Study Apparatus The construction of the 500 gallous (2,250 litre) of water is a project which has definite mathematical patterns. The choice of a cylindrical pattern of design involved the application of mathematical deductions to analyse the size of materials…

Construction of Hydro Cyclone   Abstract of Construction of Hydro Cyclone A cyclone is an equipment or a device used for the separation of dust particles from air, which has no moving component parts. This mechanism can also be defined as a system of winds circulating about a center of relatively low barometric pressure and…

Construction of Kerosene Cooking Stove   Abstract of Construction of Kerosene Cooking Stove The purpose of the construction is aimed at producing heat energy for commercial use by turning liquid fuel(kerosene).the construction was successful by appropriate selection of engineering material favourably mild steel(blacksheet) and steel iron for special p2rts. The technological properties passed by the…

Construction of a Juice Extractor Machine   Abstract of Construction of a Juice Extractor Machine A Juice extractor machine is a device that is used to extract liquid (Juice) from fruits and vegetables in a process called juicing. The machine is constructed manually with the use of local materials and tools.  The material used for…

Construction of a Chemical Rack   Abstract of Construction of a Chemical Rack The project done was a metal chemical rack. The rack was made of steel, which is soft to cutting, blending and several other operations applied to the metal during construction. The main purpose of constructing this metal rack is to be used…

Construction of 500 Galion (2250 Litres) Water Reservoir   Abstract of Construction of 500 Galion (2250 Litres) Water Reservoir The construction of the 500 gallous (2,250 litre) of water is a project which has definite mathematical patterns. The choice of a cylindrical pattern of design involved the application of mathematical deductions to analyse the size…

Production of Domestic Powder   Abstract of Production of Domestic Powder This research project is aimed at producing domestic powder and consequently, three different types of powder were produced, namely, simple face powder (pan-cake), medicated/Antiseptic powder (dristing   powder). During the various production Talcum, Zinc-oxide, Perfume, Menthol, Tragasan 300 DP (Triclosan), Mineral oil and colour (brown)…

A Project Report on Construction of Industrial Sieve Compartment   Abstract of A Project Report on Construction of Industrial Sieve Compartment The construction of Sieve Industrial Sieve Compartment was carried out in the Engineering Workshop, Institute of Management and Technology, Enugu. The aim of this project is to fabricate an industrial sieve compartment which is…

Construction of Industrial Sieve Compartment   Abstract of Construction of Industrial Sieve Compartment The construction of Sieve Industrial Sieve Compartment was carried out in the Engineering Workshop, Institute of Management and Technology, Enugu. The aim of this project is to fabricate an industrial sieve compartment which is capable of separating solid particles of various sizes….

Construction of a Pilot Motorised Mixer   Abstract of Construction of a Pilot Motorised Mixer A motorized mixer of 200 liters capacity was constructed to have the capability of mixing 200 liters of fluid during operation. The construction of the mixer involves the preliminary measures and calculations on the surface area of the metal sheet. …

The Use of Local Pigments and Extenders for Formulation and Production of Emulsion Paint   Abstract of The Use of Local Pigments and Extenders for Formulation and Production of Emulsion Paint The major aim of this project research work is to produce emulsion paint from locally sourced pigment & extenders. The materials used for the…

Comparative Analysis of Coal and Coconut Activated Carbon   Abstract of Comparative Analysis of Coal and Coconut Activated Carbon The experiment was carried out to analyze comparatively coal and coconut activated carbon.  The coal sample used in bituminous and with density of 1300kg 1m3 tile coconut shell was used. The coal and coconut shell was first activated…

The Effect of Liquid Floerate and Gas Flowrate on a Packed Absorption Tower and Repair of Equipment   Abstract of The Effect of Liquid Floerate and Gas Flowrate on a Packed Absorption Tower and Repair of Equipment The purpose of the project is to study the effect of liquid flow rate and gas flow rate…

Formulation and Production of Levera Soap   Abstract of Formulation and Production of Levera Soap The production of the soap was carried out using all the necessary equipments like the reactor, mould, stirrer, hygrometer guage etc. and all the required reagents for soap production in correct proportion. In the production, palm kernel oil (P.K.O) was…